Elevons and Control Horn Instructions

by

The video instructions including clear steps for cutting, attaching and
connecting control horns are here.

Part 2 is here:

16 Responses to “Elevons and Control Horn Instructions”

  1. John Says:

    The plans show a 2″ elevon, should it be 2 1/4 or does it matter?

  2. Eric Says:

    Your parts list does not include a speed controller? And prop saver?

  3. Eric Says:

    What’s the best way to get the 20$ parts shipping…. Email , call … Some of my emails have gone unanswered…. Thanks for the help!!! Can’t wait to build!!!

  4. brooklynaerodrome Says:

    Apologies for the delay. We will resolve this next week. Please be patient, we have been overwhelmed with response.

    thanks

    Breck

  5. Eric Says:

    Thank you for the help in advance! Looks like it’s going to take a month for my parts to come in anyway !

  6. FJ Says:

    Any detail on lighted plane build? Power? El wire? Led,s?

  7. FJ Says:

    Cant find any 1/4 poly board! Trying 3/16 foam core artist board.
    First fly is not too good😦 motor mount broke ( angle )
    Piece of alum works. Fun stuff.
    Thanx

    • brooklynaerodrome Says:

      3/16 foam core will be heavy. You might try removing the paper from one side. If you are around New York City I have foam I can sell you.

      Breck

  8. Joseph Says:

    Couple of questions (Pardon me if I have overlooked something on other posts):

    1. Is there a list of structure materials that have been attempted and flown with some degree of success?
    2. Has your design flown in a glider-only configuration or is electric power required for flight?

    Thanks!

    • brooklynaerodrome Says:

      1) We and others have flown with cardboard–pretty heavy. I have used
      the 3/8″ pink fanfold as well but again it adds weight.

      2) It is a pretty bad glider. It might be an ok slope soarer and we are looking
      into developing a better glider version–most likely we will have to get rid
      of the delta wing.

      Breck

  9. jon Says:

    Hey
    Does the foam board have to be split in half? or can you start with a full one? Also do you still sell used parts, kits, and other things that will be needed?

Leave a Reply

Fill in your details below or click an icon to log in:

WordPress.com Logo

You are commenting using your WordPress.com account. Log Out / Change )

Twitter picture

You are commenting using your Twitter account. Log Out / Change )

Facebook photo

You are commenting using your Facebook account. Log Out / Change )

Google+ photo

You are commenting using your Google+ account. Log Out / Change )

Connecting to %s


%d bloggers like this: